RELIABLE, THIN ABOVE GROUND STORMWATER MANAGEMENT
stormPANEL stormwater tanks store excess stormwater above ground and slowly release it into the council stormwater system. They are built from environmentally friendly, long-lasting material and come in two sizes – 1,000L and an available soon 2,000L. Both tanks can connect together for larger volumes.
They can also provide water storage for reuse in your garden to save on water rates.
The tanks are unobtrusive, narrow and being less than 2m tall, can be installed on fence-lines (always check local council fencing rules).
The tanks can be sunk into the ground up to 200mm further reducing height to less than 1.8m.
The range of stormPANEL tanks have been designed with mounting points on one side to allow the fitting of custom artwork, wooden trellis, or other screening system to blend into your outdoor space.
Commonly Asked Questions
What sizes and colours are available?
stormPANEL tanks are available in a range of Devan colours. Standard sizes available are 1,000L to a soon to be available 2,000L. Larger volumes are achieved by coupling multiple tanks together onsite with ease.
Who can install stormPANEL tanks?
As a retrofit installation for garden watering, the stormPANEL system is with in the ability of a home handy person but for new builds or connections to plumbing, or consented work – any qualified plumber or drain layer can install.
Do the tanks come with a guarantee?
stormPANEL stormwater tanks come with a 10-year domestic warranty. Devan has been in business for over 30 years and if there’s anything that time has taught us, it is that our customers see no compromise when it comes to confidence and reliability.
Are the tanks compliant?
They sure are! stormPANEL is designed to exceed AS/NZS4766:2020 and the material is certified to AS/NZS4766:2006, AS/NZS4020:2005, and AS/NZS 2070
What are they made of?
The highest quality polyethylene available. Polyethylene cannot rot or corrode and is ultra violet stabilised. The manufacturing process produces zero waste and the product is 100% recyclable; it’s also ideally suited to our moulding technique, giving long life and trouble free service.
Where can stomPANEL be installed?
The tanks have been designed for installation on a above ground flat surface. It is suggested to install on a concrete base min 100 mm thick, with nominal ductile mesh reinforcement if subsoils are in accordance with NZS3604 classification for “good ground”. Alternative options such as paving slabs laid on a firm compacted sand & gravel base are acceptable if subsoils are in accordance with NZS3604 classification for “good ground”.